In modern hotel rooms, wall-mounted shampoo dispensers are gradually becoming standard in high-end hotels due to their hygienic, convenient and environmentally friendly features. Proper installation of such equipment can not only enhance the guest's stay experience, but also reduce the hotel's daily operating costs. This article will detail the installation steps of wall-mounted shampoo dispensers to help hotel managers or installers complete the deployment efficiently.
Preparation before installation
Before starting the installation, make sure that the wall's load-bearing capacity meets the equipment requirements and check whether the dispenser contains all accessories, usually including the dispenser body, screws, expansion tubes, spirit levels and instructions. In addition, the installation height needs to be determined. It is generally recommended to install it at a height of 1.2-1.5 meters from the ground for the convenience of guests.
Installation steps
Determine the installation location: Use a spirit level to mark the installation center point of the dispenser on the wall to ensure that the device is level and centered. If multiple dispensers need to be installed (such as shampoo and shower gel separately), the spacing must be consistent, and a spacing of 15-20 cm is usually recommended.
Drill holes and fix the base: Use an electric drill to drill holes at the marked position, insert the expansion tube, and then use screws to fix the base of the dispenser to the wall. Pay attention to the tightness of the screws to avoid over-tightening to cause cracks in the wall or deformation of the base.
Install the dispenser body: Align the dispenser body with the base slot, and gently press or rotate to fix it. Some high-end dispensers use magnetic suction or snap-on designs. Please follow the instructions to ensure that the installation is firm.
Inject liquid and test: Open the back cover of the dispenser, inject shampoo in proportion (usually it is recommended to dilute to 70%-80% capacity to avoid overflow), and then tighten the back cover. Press the nozzle to test whether the liquid is flowing smoothly. If there is a blockage, check the nozzle or liquid concentration.
Precautions
After installation, check whether the equipment is firm to avoid the risk of falling due to looseness.
Clean the nozzle regularly to prevent scale blockage from affecting the use effect.
It is recommended to choose a dispenser with a leak-proof design to reduce liquid waste and cleaning costs.
Through the above steps, the wall-mounted shampoo dispenser can be efficiently installed and put into use, providing hotel guests with a better hygiene experience. Correct installation can not only extend the life of the equipment, but also improve the overall service quality of the hotel.
